TREND 342 TC 1/2"
£94.51
£78.76
SKU
RCTR342H
ECA Expert Says...
If you have any questions or queries message us on live chat or give us a call
- Buy 3 for £89.26 £74.38 each and save 6%
- Buy 5 for £84.01 £70.01 each and save 11%
342X1/2TC Biscuit Jointer Set.
For biscuit jointing of timber, man-made fibre and particle board with the router.
The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.
A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly.
A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed.
Boards are simply clamped together until glue is cured.
For larger boards, biscuits can be doubled up by making two passes.
| D | 40mm |
| C | 4mm |
| B | 15mm |
| B2 | 19mm |
| B3 | 23mm |
| Shank Diameter | 1/2 inch |
| Groove Depths | 8.5mm, 10.5mm & 12.5mm |
| For Biscuit sizes | No 0, 10 & 20 |
Who Viewed This Also Viewed
