HIKOKI NR1890DCJPZ 1ST FIX NAILER BODY ONLY IN CASE

Hikoki NR1890 DCJ6Z 18v 90mm First Fix Nailer Body With Case

The Hikoki model NR1890DC/J6Z 18V 90mm Clipped Head Nailer Body Only, ideal for trade professionals.

The HiKOKI NR1890DC 18V Cordless Paper Tape Nailer accepts 50mm up to 90mm, 30°+/- paper tape strip fasteners (either clipped head or offset round head). At only 4.1 kg (without battery), this cordless framing nailer is well-balanced for less user fatigue.

The on-tool control panel located at the base of the handle centralises the power button, battery charge indicator and selective actuation. To activate the tool, the power button must be depressed for more than 1 second until the green light appears. After 30 minutes of inactivity, the nailer powers off for added safety and to conserve battery power. The battery charge indicator button can be depressed to check the available power in the battery pack, for less downtime. The selective actuation button lets the user quickly select between sequential mode or bump fire mode.

The NR1890DC is equipped with a convenient tool-less depth-of-drive dial that can be easily adjusted to adapt to woods of varying density. The pivoting rafter hooks adds convenience for when the tool is not being used. The ergonomically formed, non-slip rubber grip handle is designed for comfort during extended use. A safety lockout feature is employed as an additional safety measure. In contact mode, when the trigger is pulled, the nailer must be depressed against the intended material within 2 seconds or the trigger will lock. In sequential mode the trigger must be pulled within 2 seconds of depressing the work contact or lock-out will occur. To unlock, the trigger is simply released and then pulled again to resume operation.

Features:

Cordless framing nailer with highly efficient brushless motor for longer run time, less maintenance and increased durability
No air hose or compressor required
Eliminates the cost of fuel cells
Air/spring drive system means less recoil, better flush driving and easier maintenance
High stable driving power allows the nailer to drives nails up to 90mm into lumber with ease
Selective activation button; easily choose between sequential or bump fire mode
Tool free adjustment of drive depth
Lock switch and 30 minute automatic shutdown for increased safety and longer battery life
Dry fire lockout system prevents nailer from driving when fasteners are low
Low battery indicator
Pivoting rafter hook

Specifications:

Driving System: Air spring
Nail length: 50mm to 90mm
Driving speed: 1.5 to 2 nails/sec. (intermittent)
Loading capacity: 47 nails
Firing mode: Full sequential / Contact
Dimensions (H x L x W): 342 x 309 x 127mm
Weight (exc. Battery): 4.1 kg

Comes With:

1 x Brushless framing nailer
1 x Stacker carry case with insert